Tuner Setup; External Components; Using External Audio/Video Players; Starting Playback - Kenwood DMX100 Instruction Manual

Radio

Tuner Setup

Ñ Function menu
1
Touch [FNC].
Function screen appears.
2
Set each item as follows.
Local
ON: Tunes in only to the stations with sufficient signal
strength. (LOCAL indicator lights up.)
OFF (Default): Deactivates the function.
RDS
Turns the RDS function on or off.
"ON" (Default), "OFF"
PTY List *
1
Select the available Program Type.
AF *
1
When station reception is poor, automatically switches
to the station that is broadcasting the same program
over the same Radio Data System network.
"ON" (Default), "OFF"
TA *
1
Switches to the traffic information automatically when
the traffic bulletin starts.
"ON", "OFF" (Default)
RDS Clock Sync *
1
Synchronizing the Radio Data System station time
data and this unit's clock. (CT indicator lights up.)
"ON" (Default), "OFF"
*1 Selectable only when "RDS" is set to "ON".
3
Touch [6].

External Components

Using external audio/video players

Ñ Starting playback
1
Connect an external component to the AV-IN
input terminal. (P.15)
2
Press the <MENU> button.
3
Touch [AV-IN].
4
Turn on the connected component and start
playing the source.
Ñ For Video playback
1
When the operation buttons are not displayed on
the screen, touch the display.
The operation buttons disappear when 1 is
touched or when no operation is done for about 5
seconds.

Rear view camera

To use a rear view camera, the REVERSE lead
connection is required. For connecting a rear view
camera. (P.15)
Ñ Displaying the picture from the rear view
camera
The rear view screen is displayed when you shift the
gear to the reverse (R) position.
• To erase the caution message, touch the screen.
1
English |
11