Panel Color Coordinate - Kenwood DDX8046BT Instruction Manual

Setup Menu
⁄
• See <About Picture files> (page 6) for readable
image specifications.
• The [Memory] button on the "Background" screen
becomes active only in STANDBY source mode.
• Pressing the [Memory] button on the
"Background" screen switches the AV OUT source
to OFF. For resetting the AV OUT source, refer to
<AV Output Interface Setup> (page 91).
86 DNX series DNX9960/ DNX7160/ DNX7020EX

Panel Color Coordinate

Panel Color Coordinate
DNX9/ DDX8 series : Sets the button
illumination color.
DNX7 series : Sets the screen and button
illumination color.
1 Display the Color screen
> >
Touch [ ] [
[Color]. (page 78)
2 Display the Panel Color Coordinate
screen
[Initialize] Initialization resets the
settings made using the Panel Color to
the default settings made at the factory.
[Panel Color Scan] When set to "ON",
the illumination color of the screen and
buttons changes one after another.
⁄
• When touching [SET] or [Initialize], make
sure [Panel Color Scan] is set to "OFF".
3 Select a color
1 1 1
1 Sets to the touched color.
[Adjust] Sets and registers favorite color
to the preset buttons ([P1] – [P3]).
> > > >
] [Display]