Oil Sump Suction Screen - Superior Vantage Engine O-360 SERIES Maintenance Manual

Oil Sump Suction Screen

The oil sump suction screen traps larger particles
from entering the oil system from the oil sump. If
damage to the engine
contamination is suspected, the screen should
be removed after draining the oil.
the oil filter element may also give some
indication of oil system contamination.
Remove oil sump finger screen by cutting the
safety wire securing it to the sump and removing
screen plug. Inspect screen for debris.
© February 2007 Superior Air Parts Inc.
Maintenance Manual
O-360 and IO-360 Series Engines
or oil system
Inspection of
2
If metal debris is found inside of the screen,
engine overhaul is required. Refer to Overhaul
Manual SVOHM01.
If no debris is found, reinstall screen, new crush
gasket and plug. Tighten until the plug contacts
the gasket and then turn an additional 135°.
Install safety wire, securing plug to sump.
72-50-00
Lubrication Section