General
The assembly scope of this manual is limited to
cylinder
and
accessory
replacement.
Refer
Overhaul Manual (SVOHM01) to remove and
replace other defective parts or components.
Refer to section 72-10 for alternator and starter
removal and replacement.
Refer to section 72-30 for cylinder assembly
removal and replacement.
Refer to section 72-50 for lubrication system
component removal and replacement.
© March 2006 Superior Air Parts Inc.
Maintenance Manual
O-360 and IO-360 Series Engines
ENGINE ASSEMBLY
removal
and
to
instructions
in
the
Refer to Chapter 74 for ignition system removal
and replacement.
•
Assemble the engine as required based on
the
level
of
instructions in the appropriate sections of
this manual to replace defective parts.
•
Perform
normal
inspections upon completion of assembly
and prior to engine run.
1
disassembly.
Refer
pre-run
checks
72-00-09
Engine Assembly
to
and