00 Fuel Injection System; Fuel Injector Nozzle Cleaning - Superior Vantage Engine O-360 SERIES Maintenance Manual

Fuel Injector Nozzle Cleaning

Remove the nozzle from the end of the fuel line
and cylinder. Submerge in a cleaning solvent
such as Stoddard solvent, MEK or equivalent
and allow to soak for a minimum of 10 minutes.
Remove from solvent,
compressed air and reassemble.
CAUTION: DO NOT USE A SHARP TOOL TO
CLEAN OR DISASSEMBLE FUEL NOZZLES.
NOTE: Under normal conditions, the shield
and screen are NOT removed from the
nozzle assembly.
necessary, both must be thoroughly
cleaned prior to reassembly.
shield must have a tight fit on the
body.
© March 2006 Superior Air Parts Inc.
Maintenance Manual
O-360 and IO-360 Series Engines
FUEL INJECTION SYSTEM
dry with clean
If removal is
The
1
73-10-00
Fuel Injection System