General
The disassembly scope of this manual is limited
to
cylinder
and
accessory
replacement.
Refer
Overhaul Manual (SVOHM01) to remove and
replace other defective parts or components.
Refer to section 72-10 for alternator and starter
removal and replacement.
Refer to section 72-30 for cylinder assembly
removal and replacement.
Refer to section 72-50 for lubrication system
component removal and replacement.
Refer to Chapter 74 for ignition system removal
and replacement.
© March 2006 Superior Air Parts Inc.
Maintenance Manual
O-360 and IO-360 Series Engines
ENGINE DISASSEMBLY
removal
and
to
instructions
in
the
•
Disassemble the engine only to the level
necessary to replace the defective parts or
components.
appropriate sections of this manual to
replace defective parts.
•
If there are no visual signs of damage,
corrosion, or contamination, follow the
appropriate procedures to determine the
extent of maintenance that is necessary.
1
Refer to instructions in the
72-00-06
Engine Disassembly