General
The repair scope of this manual is limited to
cylinder
and
accessory
replacement.
Refer
Overhaul Manual (SVOHM01) to remove and
replace or repair other defective parts or
components.
Refer to section 72-10 for alternator and starter
removal and replacement.
Refer to section 72-30 for cylinder assembly
removal and replacement.
© March 2006 Superior Air Parts Inc.
Maintenance Manual
O-360 and IO-360 Series Engines
REPAIR PROCEDURES
removal
and
to
instructions
in
the
Refer to section 72-50 for lubrication system
component removal and replacement.
Refer to Chapter 74 for ignition system removal
and replacement.
•
Perform
normal
inspections upon completion of assembly
and prior to engine run. Refer to instructions
in the Inspection and Check section of this
manual.
1
pre-run
checks
and
72-00-13
Repair Procedures