Maintenance Manual
O-360 and IO-360 Series Engines
Corrosion Removal
Remove corroded or pitted surfaces by polishing
with crocus cloth or other mild abrasive material.
Brush or wipe off any loose particles created by
this procedure. Clean the part that has been
abraded. Replace primer and paint as required.
Refer to Repair section in Overhaul Manual.
Parts Preservation and Corrosion Prevention
After completion of any cleaning or degreasing
operation the engine or part should be cleaned,
rinsed, and dried completely to prevent corrosion
resulting from residual moisture.
Inspect the
engine and its components to be sure they are
clean and dry.
3
72-00-07
© March 2006 Superior Air Parts Inc.
Cleaning