Control Data Corporation INFORMATION SYSTEMS TERMINAL II Hardware Maintenance Manual page 5

MANUAL TO EQUIPMENT LEVEL CORRELATION
This manual reflects the equipment configurations listed below.
EXPLANATION: Locate the equipment type and series number, as shown on the equipment FCO log, in the list below.
Immediately to the right of the series number is on FCO number. If that number and all of the numbers underneath it match
all of the numbers on the equipment FCO log, then this manual accurately reflects the equipment.
EQUIPMENT TYPE
SERIES WITH FCO'S COMMENTS
FC816-A 01
FC816-B 01
XA243-A
01
01987-2
82100083
v