FLIR B6xx series User Manual page 92

14 – Working with views and images
Related topics
14
74
5 To save an image, push the Preview/Save button.
The saved image will now be displayed in the corresponding area in the
tools pane. You can also see that the left-most area on the screen shows
the image you just saved (indicated here in red):
T630357;a1
6 Using the joystick, you can now decide in which area you want to save the
next image, and then save the image by pushing the Preview/Save button.
Continue with this procedure until you have created a complete image.
7
To finish and leave this mode, push the
For locations of camera buttons, see section 9 – Camera parts on page 21.
button.
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011