FLIR B6xx series User Manual page 132

18 – Working with alarms
18
NOTE
SEE ALSO
114
3 In the toolbox, select one of the following:
Dewpoint
■
Relative humidity
■
Insulation
■
4 To activate the alarm, do the following:
1 Select Active
2 Push the joystick.
3 Move the joystick up/down and select On.
4 Push the joystick.
5 For each parameter, enter a value according to the previous step.
6
To confirm and leave the dialog box, push the
An alarm will now be triggered when the conditions you have set for the
alarm are met.
When a building alarm is activated, all other measurement tools are inactivated.
For information about the theory behind dewpoint alarms, see section 28.4.7 –
■
Humidity & dew point on page 222.
For information about the theory behind insulation alarms, see section 28.4.8 –
■
Excerpt from Technical Note 'Assessing thermal bridging and insulation continuity'
(UK example) on page 222.
button.
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011