FLIR B6xx series User Manual page 116

16 – Working with measurement tools
16
Related topics
98
9 To set local parameters for this box or circle only, do the following:
1 Select Use local parameters.
2 Push the joystick.
3 Select Edit local parameters.
4 Push the joystick
5 To set values for emissivity, object distance and reflected apparent tem-
perature, use the joystick.
6 To confirm, push the
10 To make the box or circle trigger an alarm, select Alarm to set up alarm
parameters. For information on how to do this, see section 18 – Working
with alarms on page 111.
11
To confirm and leave the dialog box, push the
Depending on your settings, this tool may not be visible. For more information,
■
see section 22.2.1 – Changing the number of measurement tools on page 133.
For in-depth information about parameters, and how to correctly set emissivity
■
and the reflected apparent temperature, see section 32 – Thermographic measure-
ment techniques on page 263.
For locations of camera buttons, see section 9 – Camera parts on page 21.
■
button.
button.
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011