FLIR B6xx series User Manual page 102

14 – Working with views and images
Setting reference
image: Method 3
Switching
reference image
Clearing reference
image
Related topics
14
84
Follow this procedure to set an image as a reference image:
1
To go to the mode selector, push the
2
In the mode selector, select Camera
3 In the toolbox, select Set as reference image to set the currently displayed
image as a reference image.
In the toolbox, select Switch reference image to switch between the current image
and the reference image.
In the toolbox, select Clear reference image to delete reference image status for an
image.
For locations of camera buttons, see section 9 – Camera parts on page 21.
button to the right of the joystick.
and push the joystick.
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011