FLIR B6xx series User Manual page 42

9 – Camera parts
9
24
2 Auto/Manual button
The Auto/Manual button has the following functions:
When an image is in live mode:
To switch between auto-adjust mode and manual mode, push the button.
■
In manual mode you can then use the joystick to perform a variety of
actions.
To make an image calibration, push and hold the button.
■
When an image is in preview or recall mode:
To go to manual mode, push the button. In manual mode you can then
■
use the joystick to perform a variety of actions.
To make an image calibration, push and hold the button.
■
For more information, see section 14.7 – Adjusting an image on page 76.
3 Focus button
The Focus button has the following functions:
When an image is in live mode:
To adjust focus, push the button left/right.
■
To autofocus the camera, push the center of the Focus button.
■
When an image is in preview or recall mode:
To adjust zoom, push the button left/right.
■
For more information, see the following:
Section 13.17 – Adjusting the infrared camera focus on page 64
■
Section 13.18 – Autofocusing the infrared camera on page 65
■
Section 14.4 – Using the zoom function on page 72
■
4 Handle
5 N/A
6 N/A
7 Camera grip
For more information, see section 13.11 – Adjusting the camera grip on
page 58.
8 Hand strap
9 Headset connector (not shown)
For more information, see section 11 – Connecting external devices on
page 35.
10 IrDA infrared communication link
11 Focus ring on infrared lens
For more information, see section 13.16 – Adjusting the infrared camera
focus manually on page 63.
Publ. No. 1558550 Rev. a557 – ENGLISH (EN) – October 7, 2011