32.2 The ADP General Screen
Click Anti-X > ADP > General. Use this screen to turn anomaly detection on or
off and apply anomaly profiles to traffic directions.
Figure 366 Anti-X > ADP > General
The following table describes the screens in this screen.
Table 155 Anti-X > ADP > General
LABEL
General Settings
Enable
Anomaly
Detection
Policies
Priority
From, To
Anomaly Profile
ZyWALL USG 2000 User's Guide
DESCRIPTION
Select this check box to enable traffic anomaly and protocol anomaly
detection.
Use this list to specify which anomaly profile the ZyWALL uses for
traffic flowing in a specific direction.
This is the rank in the list of anomaly profile policies. The list is
applied in order of priority.
This is the direction of travel of packets to which an anomaly profile
is bound.
Note: Depending on your network topology and traffic load,
applying every packet direction to an anomaly profile may
affect the ZyWALL's performance.
An anomaly profile is a set of anomaly rules with configured
activation, log and action settings. This field shows which anomaly
profile is bound to which traffic direction.
Chapter 32 ADP
523