ZyXEL Communications ZyWall USG 2000 User Manual page 759

The firmware update can take up to five minutes. Do not turn off or
reset the ZyWALL while the firmware update is in progress!
Figure 509 Maintenance > File Manager > Firmware Package
The following table describes the labels in this screen.
Table 244 Maintenance > File Manager > Firmware Package
LABEL
Boot
Module
Current
Version
Released
Date
File Path
Browse... Click Browse... to find the .bin file you want to upload. Remember that you
Upload
After you see the Firmware Upload in Process screen, wait two minutes before
logging into the ZyWALL again.
Figure 510 Firmware Upload In Process
Note: The ZyWALL automatically reboots after a successful upload.
ZyWALL USG 2000 User's Guide
DESCRIPTION
This is the version of the boot module that is currently on the ZyWALL.
This is the firmware version and the date created.
This is the date that the version of the firmware was created.
Type in the location of the file you want to upload in this field or click Browse
... to find it.
must decompress compressed (.zip) files before you can upload them.
Click Upload to begin the upload process. This process may take up to two
minutes.
Chapter 47 File Manager
759