ZyXEL Communications ZyWall USG 2000 User Manual page 770

Chapter 48 Logs
The following table describes the labels in this screen.
Table 248 Maintenance > Log > Log Setting > Edit (System Log)
LABEL
E-Mail Server 1/
2
Active
Mail Server
Mail Subject
Send From
Send Log To
Send Alerts
To
Sending Log
Day for
Sending Log
Time for
Sending Log
SMTP
Authenticatio
n
User Name
Password
Active Log and
Alert
Log Category This field displays each category of messages. It is the same value used
770
DESCRIPTION
Select this to send log messages and alerts according to the
information in this section. You specify what kinds of log messages are
included in log information and what kinds of log messages are
included in alerts in the Active Log and Alert section.
Type the name or IP address of the outgoing SMTP server.
Type the subject line for the outgoing e-mail.
Type the e-mail address from which the outgoing e-mail is delivered.
This address is used in replies.
Type the e-mail address to which the outgoing e-mail is delivered.
Type the e-mail address to which alerts are delivered.
Select how often log information is e-mailed. Choices are: When Full,
Hourly and When Full, Daily and When Full, and Weekly and
When Full.
This field is available if the log is e-mailed weekly. Select the day of the
week the log is e-mailed.
This field is available if the log is e-mailed weekly or daily. Select the
time of day (hours and minutes) when the log is e-mailed. Use 24-hour
notation.
Select this check box if it is necessary to provide a user name and
password to the SMTP server.
This box is effective when you select the SMTP Authentication check
box. Type the user name to provide to the SMTP server when the log is
e-mailed.
This box is effective when you select the SMTP Authentication check
box. Type the password to provide to the SMTP server when the log is
e-mailed.
in the Display and Category fields in the View Log tab. The Default
category includes debugging messages generated by open source
software.
ZyWALL USG 2000 User's Guide