ZyXEL Communications ZyWall USG 2000 User Manual page 51

Table 6 Navigation Panel Summary (continued)
LINK TAB
IDP/AppPatrol
System Protect
Network
Interface Status
Port Grouping
Ethernet
PPP
Cellular
VLAN
Bridge
Auxiliary
Trunk
Routing Policy Route
Static Route
RIP
OSPF
Zone
DDNS Profile
Status
Virtual
Server
HTTP
Redirect
ALG
IP/MAC Summary
Binding
Exempt List
Monitor
ZyWALL USG 2000 User's Guide
FUNCTION
Use this screen to schedule IDP signature updates and to update
signature information immediately.
Use this screen to schedule system-protect signature updates and
to update signature information immediately.
Use this screen to see information about all of the ZyWALL's
interfaces and their connection status.
Use this screen to configure physical port groups.
Use this screen to manage Ethernet interfaces and virtual Ethernet
interfaces.
Use this screen to create and manage PPPoE and PPTP interfaces.
Use this screen to configure settings for a cellular Internet
connection through an installed 3G card.
Use this screen to create and manage VLAN interfaces and virtual
VLAN interfaces.
Use this screen to create and manage bridges and virtual bridge
interfaces.
Use this screen to manage the AUX port.
Use this screen to create and manage trunks for load balancing
and link HA.
Use this screen to create and manage routing policies.
Use this screen to create and manage IP static routing information.
Use this screen to configure device-level RIP settings.
Use this screen to configure device-level OSPF settings, including
areas and virtual links.
Use this screen to configure zones used to define various policies.
Use this screen to define and manage the ZyWALL's DDNS domain
names.
Use this screen to view the status of the ZyWALL's DDNS domain
names.
Use this screen to set up and manage port forwarding rules.
Use this screen to set up and manage HTTP redirection rules.
Use this screen to configure SIP, H.323, and FTP pass-through
settings.
Use this screen to configure IP to MAC address bindings for devices
connected to each supported interface.
Use this screen to configure ranges of IP addresses to which the
ZyWALL does not apply IP/MAC binding.
Use this screen to display the devices that have received an IP
address from ZyWALL interfaces with IP/MAC binding enabled.
Chapter 3 Web Configurator
51