Internet Access - Finish - ZyXEL Communications ZyWall USG 2000 User Manual

Chapter 4 Wizard Setup
Table 10 Internet Access: PPTP Encapsulation (continued)
LABEL
Retype to
Confirm
Nailed-Up
Idle Timeout
PPTP
Configuration
Base Interface
Base IP Address
IP Subnet Mask
Server IP
Connection ID
WAN IP Address
Assignments
WAN Interface
Zone
IP Address
First DNS Server
Second DNS
Server
Back
Next

4.2.4 Internet Access - Finish

You have set up your ZyWALL to access the Internet.
66
DESCRIPTION
Type your password again for confirmation.
Select Nailed-Up if you do not want the connection to time out.
Type the time in seconds that elapses before the router automatically
disconnects from the PPTP server.
This displays the identity of the Ethernet interface you configure to
connect with a modem or router.
Type the (static) IP address assigned to you by your ISP.
Type the subnet mask assigned to you by your ISP (if given).
Type the IP address of the PPTP server.
Enter the connection ID or connection name in this field. It must follow
the "c:id" and "n:name" format. For example, C:12 or N:My ISP.
This field is optional and depends on the requirements of your DSL
modem.
You can use alphanumeric and -_
characters long.
These fields are read-only if you selected Auto as the IP Address
Assignment in the previous screen.
This displays the identity of the interface you configure to connect with
your ISP.
This field displays to which security zone this interface and Internet
connection will belong.
Enter your WAN IP address in this field.
These fields displayd if you selected static IP address assignment. DNS
(Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. The DNS server is extremely
important because without it, you must know the IP address of a
computer before you can access it. The ZyWALL uses a system DNS
server (in the order you specify here) to resolve domain names for
VPN, DDNS and the time server.
Enter the DNS server's IP address(es) in the field(s) to the right.
Leave the field as 0.0.0.0 if you do not want to configure DNS servers.
If you do not configure a DNS server, you must know the IP address of
a machine in order to access it.
Click Back to return to the previous screen.
Click Next to continue.
characters, and it can be up to 31
:
ZyWALL USG 2000 User's Guide