Display-Equipped Intercom As Viewed By External User; Advertisement Mode - 2N Helios IP Vario Installation Manual

3.3 Display-Equipped Intercom as Viewed by External
User
Until the display program is uploaded to
following text:
this state,
Display-Equipped
With the proper display configuration, the advertisement or electronic name tag mode
is displayed upon the
The display-equipped
keypad and quick dialling buttons. Buttons 2, 4, 6 and 8 are cursor keys in the
telephone directory mode. Buttons 3 and 6 are functional keys and initiate the action
displayed in the right-hand and left-hand screen corners.

Advertisement Mode

One or more images defined in the display program are displayed in the advertisement
mode. To quit the ad mode and move to the electronic name tag mode, push any quick
dialling button or numeric keypad key.
Electronic Name Tags
1, 2 or 4 name tags emulating the paper name tags can be displayed in the electronic
name tag mode. Push one of the 1, 2, 4 and 5 quick dialling buttons to call the user
assigned.
You can also enter the door lock opening codes and activate or deactivate a user or
profile in this mode. For steps refer to the no-display
®
2N TELEKOMUNIKACE a.s., www.2n.cz
2N Helios IP display is not configured
®
2N Helios IP Vario
®
2N Helios IP Vario
®
2N Helios IP Vario
®
2N Helios IP Vario
®
2N Helios IP Vario
behaves and is controlled like no-display models, see
Control as Viewed by External User.
power on as pre-programmed.
model is controlled using the numeric
2N
, the display shows the
; refer to the figure below. In
®
Helios IP Vario subsection.
56