Getting The Pc And Router Communicating - Allied Telesis AR100 series User Manual

3-8
2. Click Install Software to open the CD-ROM Install Software screen (Fig-
ure 3-9).
Figure 3-9: CD-ROM Install Software screen
I
Install the support files for the AR100 Access Wizard on your PC by click-
ing on AR100 Access Wizard and following the on screen instructions.
I
If you do not have Adobe Acrobat Reader installed on your PC, install it
now by clicking Acrobat Reader and following the on screen instructions.
You will need Acrobat Reader to view the User Guide or the Reference
Manual.
I
If you do not already have a web browser installed on your PC, install one
now by clicking on either Internet Explorer or Netscape Communicator
and following the on-screen instructions. You will use the web browser to
configure the router with information specific to your connections.
I
Click Main Menu to return to the CD-ROM Main Menu.

Getting the PC and router communicating

The AR100 Access Wizard will automatically set up communication between
your PC and your router. It checks that your PC has an Ethernet adapter card,
that TCP/IP is installed and correctly configured, and that a web browser is
installed. It checks that there is a connection between the router and the PC,
and makes sure that the router and the PC have the IP addresses they need to
communicate with one another.
If anything in the system setup prevents communication, dialog boxes will tell
you what to do. For more information, see Chapter 10, Troubleshooting. If you
need to restart the AR100 Access Wizard after an interruption, remove the CD,
re-insert it in the CD-ROM drive, and click Configure Router again.
Getting the PC and router communicating