Inter-Office Connection - Allied Telesis AR100 series User Manual

10-14
I
The router is configured with a valid ISDN number, but it is not the ISP's
directory number. Make sure that the correct ISDN number for your ISP is
entered in the Internet Connection page.
Test username and password by logging into ISP: Failed
Your router failed to log into the ISP.
I
Make sure the correct username and password are entered in the Internet
Connection page. Try again.
I
If the problem persists, contact your ISP.
Test IP connection to ISP: Failed
Your router failed to make an IP connection to the ISP.
I
There is an error in the configuration of either your router or the ISP's
router. Contact your ISP.

Inter-Office Connection

The Inter-Office connection tests check that your router can connect to your
remote office.
Test ISDN call setup by making an ISDN call to office: Failed
The router failed to make an ISDN call to the remote office. This may have one
of the following causes.
I
The router is configured with the wrong ISDN directory number for the
remote office. Make sure that the correct ISDN number for your ISP is
entered in the Inter-Office Connection page.
I
The remote office is busy or unavailable. Try again later, and if the problem
persists, contact your network administrator at the remote office.
I
There is congestion or a fault in the ISDN network. Try again later, and if
the problem persists, contact your ISDN service provider.
Test PPP connection to your office: Failed
The router failed to make a PPP connection to the remote office. This may have
one of the following causes:
I
There is an error in the configuration of either your router or the remote
office router. Contact your network administrator at the remote office.
I
The router is configured with a valid ISDN number, but it is not the remote
office directory number. Make sure that the correct ISDN number for your
remote office is entered in the Inter-Office Connection page.
Test username and password by logging into office: Failed
Your router failed to log into the remote office.
I
Make sure the correct username and password are entered in the Inter-
Office Connection page. Try again.
I
If the problem persists, contact your network administrator at the remote
office.
Connection test fails