Accessing The Diagnostic Partition On The Windows Server 2003 Operating System - Sun Microsystems Sun Fire X2100 M2 Service Manual

Hide thumbs Also See for Sun Fire X2100 M2:
Table of Contents

Advertisement

8. Type the following to install the diagnostic partition:
# ./install.sh
9. Press the Enter key.
The following lines appear if the diagnostic partition is mounted successfully:
Mounting Diagnostic Partition
Installing Successful
10. Type the following command to list the contents of the diagnostic partition:
# ls /diagpart
3.6.6
Accessing the Diagnostic Partition on the
Windows Server 2003 Operating System
The Windows 2003 Server operating system does not allow you to mount a
diagnostic partition. There is no way to view or gain access to the diagnostic
partition if you are running Windows 2003 on a Sun Fire X2100 M2 server.
The only way to retrieve the contents (log files) on the diagnostic partition is to
attach a USB diskette drive to the Sun Fire X2100 M2 server and complete the
following procedure.
1. Connect the USB diskette drive to any USB port on the Sun Fire X2100 M2 server.
2. Insert the Tools and Drivers CD into the DVD tray.
3. Reboot the server.
4. At the Tools and Drivers CD main menu, type 3 to exit to DOS.
5. Type the following at the DOS command prompt:
C:> d:
3-16
Sun Fire X2100 M2 Server Service Manual • December 2006

Advertisement

Table of Contents
loading

Table of Contents