Command 03 - Read Dynamic Variables - ProSoft Technology ProLinx-HART Driver Manual

ProLinx-HART ♦ ProLinx Gateway
HART Master with Analog I/O

COMMAND 03 - Read Dynamic Variables

Description
This command gets the current and four (predefined) dynamic Variables.
Write Parameters
NONE
Floating Point Data Returned
Word High Byte
0 Current (mA)
1
2 Primary Variable
3
4 Second Variable
5
6 Third Variable
7
8 Fourth Variable
9
Integer Data Returned
Word High Byte
0 STATUS WORD
1 Primary Variable Units Code
2 Third Variable Units Code
ProSoft Technology, Inc.
October 13, 2011
Low Byte
Low Byte
Second Variable Units Code
Fourth Variable Units Code
Reference
Driver Manual
Page 45 of 104