7. Specifications
Continuous Power Output
(All Channels)
Bridged Power Output
(All Channels)
Input Sensitivity
Input Impedance
AUTO ON (Audio Sense)
Sensitivity
12 Volt Trigger Input
12 Volt Trigger Output
S/N ratio
Frequency Response
Distortion (Un-bridged)
Distortion (Bridged)
Input Voltage
115V AC
Fuse
230V AC
Dimensions (Inches)
Weight
Certification
www.snapav.com Support: 866.838.5052
45 watts RMS at 4 ohms
30 watts RMS at 8 ohms
90 Watts per channel RMS at 8 ohms
Note: Maintain 8 ohm minimum when using bridge mode
500mV
20,000 ohms
2.5mV
12V DC; 10K Ohms
12V DC; 10mA
95 dB
20 Hz to 20 kHz
0.1% THD 20 Hz-20 kHz
0.1% THD 20 Hz-20 kHz
115V AC/230V AC
T8AL 250V
T4AL 250V
17"W x 2.3"H x 11"D
9.4 lbs.
Meets FCC Part 15, ETL Listed and tested under UL/EN60065
EA-AMP-12D-45A Installation Manual
Pg. 17