Related Manuals for Episode EA-AMP-12D-70
Summary of Contents for Episode EA-AMP-12D-70
- Page 1 Multi-Channel, Class D, OWNER’S MANUAL >> 70 Watt Amplifier EA-AMP-12D-70 EA-AMP-8D-70 12 CHANNEL 8 CHANNEL...
-
Page 2: Important Safety Instructions
IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus in or near rain or moisture. 1. Read the following instructions carefully. 2. Keep manual for future reference. 3. Heed all warnings. 4. -
Page 3: Power Mode
RACK-MOUNTABLE Each Episode amplifier includes an accessory package of rack ‘ears’ that may be attached to the amplifier by simply removing the four (4) side cover screws near the front of the amplifier, and re-installing them through the rack ‘ear’. The amplifier feet can be easily removed for clean rack mounting. - Page 4 EA-AMP-12D-70 REAR PANEL FEATURES (12D and 8D) 1. GLOBAL INPUT Easily amplify outputs from any stereo source across any/all channels 2. LOOP OUT Allow global inputs to be sent to other amplifiers 3. GLOBAL LEVEL Master Gain control for the amplifier 4.
-
Page 5: Speaker Outputs
EA-AMP-8D-70 7. INPUT SWITCH Choose between global inputs and individual inputs for each channel 8. SPEAKER OUTPUTS 9. MASTER POWER SWITCH Disables power to the amplifier 10. 12V TRIGGER IN/OUT Requires 12 Volt DC input for triggering the state of the amplifier Note: Front power button must be in standby mode (Red LED) for the 12 volt trigger to operate 11. -
Page 6: Loop Outputs
• Listen to the bass. Is it full or thin? Listen to volume of the bass as well. • Turn off your receiver and reverse the connections for one of the speakers connected to your Episode amplifier. • Repeat your test at the same volume level. When the sound has the loudest and best sounding bass and also sounds best in the vocal region, your connections are correct and in-phase. -
Page 7: Input Selection
INSTALLATION – SETUP AND OPTIONS INPUT SELECTION CAUTION: Only change switch positions when the amplifier is turned off. Each channel is capable of delivering the source from a dedicated Line-In or the Global-Input by changing the Line-In/ Global In switch. POWER CONNECTION Plug the supplied power cord into the amplifier and to Switch in bridged mode... - Page 8 EPISODE MULTI-ROOM INSTALLATION ® OUTPUT CD PLAYER RECEIVER OUTPUT INPUT INPUT INPUT OUTPUT IPOD OUTPUT DVD PLAYER ROOM 1 ROOM 2 ROOM 3 ROOM 4 ROOM 5 ROOM 6...
- Page 9 EPISODE MULTI-ZONE INSTALLATION ® CD PLAYER DVD PLAYER TUNER IPOD OUTPUT OUTPUT OUTPUT OUTPUT AUDIO MATRIX SWITCHER TUNER INPUT INPUT INPUT INPUT ZONE 1 ZONE 2 ZONE 3 ZONE 4 ZONE 5 ZONE 6 OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT OUTPUT...
- Page 10 EPISODE HOME THEATER/MULTI-ROOM INSTALLATION ® HOME THEATER RECEIVER SPEAKER SUBWOOFER MULTIROOM OUTPUTS OUTPUT OUTPUT INPUT INPUT INPUT REAR REAR LEFT CENTER RIGHT LEFT RIGHT OUTPUT OUTPUT DVD PLAYER OUTPUT CD PLAYER ROOM 1 ROOM 2 ROOM 3 ROOM 4 ROOM 5...
- Page 11 TROUBLESHOOTING •Power cable to the amplifier is incorrectly connected or plugged into an outlet that does not have power. Check connections and verify power on the outlet. No audio from any channel. •Audio cable to the source component is not connected properly, connected to incorrect BUS input or the cable is defective.
-
Page 12: Specifications
*All specifications are subject to change without notice WARRANTY 2-Year Limited Warranty Episode Amplifier Products have a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all ® components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled.