Specifications; Warranty - Episode EA-AMP-12D-70 Owner's Manual

SPECIFICATIONS

Continuous Power Output
All channels driven
Bridged Power Output
All channels driven
Input Sensitivity
Input Impedance
S/N ratio
Frequency Response
Distortion (Unbridged)
Distortion (Bridged)
Dimensions
Weight
Certification
*All specifications are subject to change without notice

WARRANTY

2-Year Limited Warranty
Episode Amplifier Products have a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all
®
components found to be defective in material or workmanship under normal conditions of use. This warranty shall
not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty
must be returned to SnapAV or a designated service center with prior notification and an assigned return
authorization number (RA).
50 watts RMS at 8 ohms
70 watts RMS at 4 ohms
140 Watts per channel RMS at 8 ohms
Note: Maintain 8 ohm minimum when using bridge mode
500mV
20,000 ohms
95 dB
20 Hz to 20 kHz
0.1% THD 20 Hz-20 kHz
0.1% THD 20 Hz-20 kHz
17"w x 4"h (including feet) x 13" deep
32 lbs.
Meets FCC Part 15, ETL Listed and tested under UL/EN60065
110309