IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS WARNING: To reduce the risk of fire or electric shock, do not expose this apparatus in or near rain or moisture. 1. Read and keep these instructions for future reference. 2. Do not use this apparatus near water. 3.
Page 3
It has been designed with advanced technological components that produce astounding sound effects in movies, as well as recreating the heights and depths of all types of music. Episode® amplifiers provide the best value and quality possible for your home theater needs.
CROSS-OVER – Crossover frequency setting of the Low Pass Filter. Factory-set at 80Hz. Each EA-AMP-SUB-1D-500 has the capability to be adjusted from 40 to 160Hz. d. Boundary EQ – Removes exaggerated boomy sounds created by corner loading, large wall surfaces, or installations inside custom cabinetry.
4. CONTROL INPUT a. Use this 1/8˝ Mono mini-jack to connect to most IR emitter output connections. The signal will be transferred and flashed to the IR receiver internally behind the front panel. This will eliminate the need to add “stick-on” emitters in most systems.
INSTALLATION – FIRST STEPS POSITIONING YOUR EPISODE AMPLIFIER Episode amplifiers are designed to help deliver a great audio experience that makes your music come alive for years to come. However, where you place the amplifier can have a large effect on the performance that you receive and the life of the unit.
OPERATION The EA-AMP-SUB-1D-500 can be controlled manually from the front panel or via the supplied hand-held remote. A remote IR input can also be used for systems hidden behind closed cabinet doors or in an equipment rack located in other areas of the home. On the front panel, you will find the following features: 1.
WARRANTY 2-Year Limited Warranty Episode™ Amplifier Products have a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all components found to be defective in material or workmanship under normal conditions of use. This warranty shall not apply to products which have been abused, modified or disassembled. Products to be repaired under this warranty must be returned to the SnapAV or a designated service center with prior notification and an assigned return authorization number (RA).