Specifications; Warranty; Contacting Technical Support - Episode DYNAMIC Series Installation Manual

SPECIFICATIONS

Continuous Power Output
All Channels Driven
Bridged Power Output
All Channels Driven
Input Sensitivity
Input Impedance
S/N Ratio
Frequency Response
Distortion
Dimensions
Operating Temperature
Weight
Certification

WARRANTY

2-Year Limited Warranty
Episode® Amplifiers have a 2-Year Limited Warranty. This warranty includes parts and labor repairs on all
components found to be defective in material or workmanship under normal conditions of use. This warranty shall
not apply to products which have been abused, modified or disassembled. Products to be repaired under this
warranty must be returned to the SnapAV or a designated service center with prior notification and an assigned
Return Authorization (RA) number.

CONTACTING TECHNICAL SUPPORT

As a thank you for purchasing Episode® Electronics products, direct technical support services are available via
phone or e-mail. We encourage you to use this resource for any questions or concerns about our products. Visit our
website for more support documentation.
(866) 838-5052
techsupport@snapav.com
snapav.com
WARNING: This product may expose you to chemicals known to the State of California to cause cancer
and reproductive harm. For more information go to www.P65Warnings.ca.gov.
2D-200
100 watts RMS at 8 ohms
200 watts RMS at 4 ohms
N/A
500mV
20,000 ohms
95dB
20Hz to 20kHz
0.1% THD 20Hz - 20kHz
9.84* 7.87 *1.70
14°F - 104°F
3.08 lb.
UL Listed
© 2019 Episode®
Rev: 191023-1520
8D/12D/16D-100
50 watts RMS at 8ohms
100 watts RMS at 4ohms
200 watts RMS at 8ohms
500mV
20,000 ohms
95dB
20Hz to 20kHz
0.1% THD 20Hz - 20kHz
11.81*17.17*3.45
14° - 104°F
10.8 lb.
UL Listed