Installing The Integrated Storage Controller Card; Expansion Cards And Expansion-Card Risers; Expansion Card Installation Guidelines - Dell PowerEdge R730 Owner's Manual

Rack servers
Hide thumbs Also See for PowerEdge R730:
Table of Contents

Advertisement

Installing the integrated storage controller card

Prerequisites
1.
Ensure that you read the
2.
Follow the procedure listed in
3.
Remove the cooling shroud.
4.
Remove the expansion-card riser 1.
5.
Keep the #2 Phillips screwdriver handy.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
Align the end of the integrated storage-controller card opposite the connector with the integrated
storage-controller card holder.
2.
Lower the connector side of the integrated storage-controller card into the integrated storage-
controller card connector on the system board.
Ensure that the tabs on the system board align with the screw holes on the integrated storage-
controller card.
3.
Align the screws on the integrated storage-controller card cable with the screw holes on the
connector.
4.
Tighten the screws to secure the integrated storage-controller card cable with the integrated
storage-controller card connector on the system board.
Next steps
1.
Replace the expansion-card riser 1.
2.
Replace the cooling shroud.
3.
Follow the procedure listed in

Expansion cards and expansion-card risers

NOTE: A missing or an unsupported expansion-card riser logs an SEL event. It does not prevent
your system from powering on and no BIOS POST message or F1/F2 pause is displayed.

Expansion card installation guidelines

Depending on your system configuration:
The following PCI Express generation 3 expansion cards are supported:
Table 3. Supported expansion cards
Riser
PCIe slot
1
1
1
2
96
Safety
instructions.
Before working inside your
After working inside your
Processor
Height
connection
Processor 2
Low Profile
Processor 2
Low Profile
system.
system.
Length
Link width Slot width
Half Length
x8
Half Length
x8
x16
x16

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge r730xd

Table of Contents