Dell PowerEdge R730 Owner's Manual page 132

Rack servers
Hide thumbs Also See for PowerEdge R730:
Table of Contents

Advertisement

2.
Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
Unpack the new system board assembly.
CAUTION: Do not lift the system board assembly by grasping a memory module, processor,
or other components.
CAUTION: Take care not to damage the system identification button while placing the
system board into the chassis.
2.
Hold the touch points and lower the system board into the chassis.
3.
Push the system board toward the back of the chassis until the board clicks into place.
Next steps
1.
Install the Trusted Platform Module (TPM). For information on how to install TPM,
Trusted Platform
Module. For more information on TPM, see
NOTE: The TPM plug-in module is attached to the motherboard and cannot be removed. A
replacement TPM plug-in module will be provided for all motherboard replacements where a
TPM plug-in module was installed.
2.
Replace the following:
a.
cable retention bracket
b.
PCIe card holder
c.
hard-drive tray (if applicable)
d.
integrated storage controller card
e.
internal USB key (if applicable)
f.
internal dual SD module
g.
all expansion-card risers
h.
heat sink(s)/heat-sink blank(s) and processors(s)/processor blank(s)
i.
memory modules and memory module blanks
j.
network daughter card
k.
cooling-fan assembly
l.
cooling shroud
m. power supply unit(s)
3.
Reconnect all cables to the system board.
NOTE: Ensure that the cables inside the system are routed along the chassis wall and secured
using the cable securing bracket.
4.
Follow the procedure listed in
5.
Import your new or existing iDRAC Enterprise license. For more information, see Integrated Dell
Remote Access Controller User's Guide, at dell.com/esmmanuals.
6.
Ensure that you:
a.
Use the Easy Restore feature to restore the service tag. For more information, see
service tag using Easy Restore
132
Before working inside your
After working inside your
.
system.
Trusted Platform
Module.
system.
Installing the
Restoring the

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge r730xd

Table of Contents