System Security Settings Screen Details - Dell PowerEdge R730 Owner's Manual

Menu Item Description
Number of Turbo
Boot Enabled
Cores for
Processor 1 Controls the number of turbo boost enabled cores for processor 1. By default, the
maximum number of cores is enabled.
Monitor/Mwait Enables the Monitor/Mwait instructions in the processor. By default, the Monitor/
Mwait option is set to Enabled for all system profiles, except Custom.

System Security settings screen details

You can use the System Security screen to perform specific functions such as setting the system
password, setup password, and disabling the power button.
You can view the System Security screen by clicking System Setup Main Menu → System BIOS →
System Security Settings.
The System Security Settings screen details are explained as follows:
Example
Menu Item Description
Intel AES-NI Improves the speed of applications by performing encryption and decryption using
the Advanced Encryption Standard Instruction Set and is set to Enabled by default.
System Password Sets the system password. This option is set to Enabled by default and is read-only
if the password jumper is not installed in the system.
Setup Password Sets the setup password. This option is read-only if the password jumper is not
installed in the system.
Password Status Locks the system password. By default, the Password Status option is set to
Unlocked.
TPM Security
Allows you to control the reporting mode of the Trusted Platform Module (TPM).
By default, the TPM Security option is set to Off. You can only modify the TPM
Status, TPM Activation , and Intel TXT fields if the TPM Status field is set to either
On with Pre-boot Measurements or On without Pre-boot Measurements.
TPM Information Changes the operational state of the TPM. By default, the TPM Activation option is
set to No Change.
TPM Status Displays the TPM status.
TPM Command
NOTE: If there are two processors installed in the system, you see an entry for
Number of Turbo Boost Enabled Cores for Processor 2.
NOTE: This option can be disabled only if the C States option in Custom
mode is disabled.
NOTE: When C States is enabled in Custom mode, changing the Monitor/
Mwait setting does not impact system power/performance.
NOTE: The TPM menu is available only when the TPM module is installed.
CAUTION: Clearing the TPM results in the loss of all keys in the TPM. The
loss of TPM keys may affect booting to the operating system.
47