Installing A Hot-Swap Hard Drive - Dell PowerEdge R730 Owner's Manual

Figure 69. Removing and installing a 1.8 inch hot-swap hard drive
1. release button
3. hard-drive carrier handle
Related video
http://www.Dell.com/QRL/Server/PER730/HDD

Installing a hot-swap hard drive

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
CAUTION: Use only hard drives that have been tested and approved for use with the hard-drive
backplane.
CAUTION: Combining SAS and SATA hard drives in the same RAID volume is not supported.
CAUTION: When installing a hard drive, ensure that the adjacent drives are fully installed.
Inserting a hard-drive carrier and attempting to lock its handle next to a partially installed carrier
can damage the partially installed carrier's shield spring and make it unusable.
142
2. hard-drive carrier