Dell PowerEdge R730 Owner's Manual page 13

Item Indicator, button, or
connector
4 Video connector
5 LCD menu buttons
6 Information tag
7 LCD panel
8 Hard drives
9 vFlash media card slot
10 USB connector
11 USB management port/
iDRAC Direct
12 Optical drive (optional)
13 Tape drive slot (optional)
14 Quick Sync (optional)
Icon Description
Allows you to connect a VGA display to the
system.
Allow you to navigate the control panel LCD
menu.
A slide-out label panel which allows you to record
system information such as Service Tag, NIC, MAC
address and so on as per your need.
Displays system ID, status information, and system
error messages. The LCD lights blue during normal
system operation. The LCD lights amber when the
system needs attention, and the LCD panel
displays an error code followed by descriptive text.
NOTE: If the system is connected to a power
source and an error is detected, the LCD lights
amber regardless of whether the system is
turned on or off.
Up to sixteen 2.5 inch hot-swappable hard drives.
Allows you to insert a vFlash media card.
Allows you to connect USB devices to the system.
The ports are USB 2.0-compliant.
Allows you to connect USB devices to the system
or provides access to the iDRAC Direct features.
For more information, see the Integrated Dell
Remote Access Controller User's Guide at
dell.com/esmmanuals. The USB management port
is USB 2.0-compliant.
One optional SATA DVD-ROM drive or DVD+/-RW
drive.
One optional 3.5 inch tape backup unit.
Indicates a Quick Sync enabled system. The Quick
Sync feature is optional and requires a Quick Sync
bezel. This feature allows management of the
system using mobile devices. This feature
aggregates hardware/firmware inventory and
various system level diagnostic/error information
that can be used in troubleshooting the system.
For more information, see the Integrated Dell
Remote Access Controller User's Guide at
dell.com/esmmanuals.
13