Installing An Ac Power Supply Unit - Dell PowerEdge R730 Owner's Manual

Figure 57. Removing and installing an AC power supply unit
1. release latch
3. power supply unit
5. power supply unit handle
Related video
http://www.Dell.com/QRL/Server/PER730/PSU

Installing an AC power supply unit

Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1. Verify that both the power supply units are the same type and have the same maximum output
power.
NOTE: The maximum output power (shown in watts) is listed on the power supply label.
2. If applicable, remove the power supply unit blank.
124
2. power supply unit cable connector
4. connector