Cable Retention Bracket; Removing The Cable Retention Bracket - Dell PowerEdge R730 Owner's Manual

Cable retention bracket

Removing the cable retention bracket

Prerequisites
1. Ensure that you read the
2. Follow the procedure listed in
3. Remove the cooling shroud.
4. Remove the PCIe card holder.
5. Remove all cables routed through the cable retention bracket.
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1. Pull the tab to release it from the notch and slide the cable retention bracket toward the front of the
chassis to release it from the chassis.
2. Lift the cable retention bracket out of the chassis.
Figure 38. Removing and installing the cable retention bracket
1. alignment pin (2)
3. cable retention bracket
Safety instructions.
Before working inside your system.
2. tab
93