Cooling-Fan Assembly; Removing The Cooling-Fan Assembly - Dell PowerEdge R730 Owner's Manual

Rack servers
Hide thumbs Also See for PowerEdge R730:
Table of Contents

Advertisement

CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
Align the plug at the base of the cooling fan with the connector on the system board.
2.
Slide the cooling fan into the securing slots until the tabs lock into place.
Next steps
Follow the procedure listed in

Cooling-fan assembly

Removing the cooling-fan assembly

Prerequisites
1.
Ensure that you read the
2.
Follow the procedure listed in
CAUTION: Many repairs may only be done by a certified service technician. You should only
perform troubleshooting and simple repairs as authorized in your product documentation, or as
directed by the online or telephone service and support team. Damage due to servicing that is
not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that came with the product.
Steps
1.
Unlock the cooling-fan assembly from the chassis by lifting the release levers upward.
2.
Lift the cooling-fan assembly out of the chassis.
72
After working inside your
Safety
instructions.
Before working inside your
system.
system.

Advertisement

Table of Contents
loading

This manual is also suitable for:

Poweredge r730xd

Table of Contents