Figure 78. Cabling diagram—3.5 inch (x8) SAS/SATA backplane—PowerEdge R730 (option 2)
1.
hard-drive backplane
3.
system board
5.
SAS B connector on the system board
Next steps
1.
Replace the hard-drive backplane. See
2.
Follow the procedure listed in
Removing the hard-drive backplane (R730xd)
Prerequisites
1.
Ensure that you read the
2.
Follow the procedure listed in
3.
Remove the cooling shroud.
152
Installing the hard-drive backplane (R730 and
After working inside your
Safety
instructions.
Before working inside your
2.
backplane signal connector 1
4.
SAS A connector on the system board
system.
system.
R730xd).