GDC SX-2000 Installation Manual page 15

b. Read and perform the actions listed in the Marriage Checklist. In the Marriage
Checklist window (see Figure 17), the system checks that all tamper switches are
secure and lists items that you must check to ensure the projector is secure
before proceeding. Click the [Next] button to proceed to the Arming window.
c. Arm the marriage. In the Arming window, click the Arm Marriage button (refer
to Figure 18). A 30 second count-down timer begins. The LED in the Marriage
button on the PI Board will flash green during this count-down. You MUST press
the Marriage button on the PI Board within this 30 second window in order for
the marriage to take effect. When the Marriage button is pressed, the LED
button will change to a solid green to indicate a successful marriage.
GDC Technology Ltd.
SX-2000 Installation Manual
Figure 17 Marriage checklist
11/8/2010
Page 14 of 42