GDC SX-2000 Installation Manual page 9

Figure 9 shows the location where the IMB should be installed on a NEC projector. Remove any
existing interface boards or placeholder faceplates from this position before installing the IMB.
Please refer to the projector manuals for more details on preparing the projector for IMB
installation.
2.5.1.3 Inserting IMB to the Projector
Make sure the projector is powered off before installing the IMB on the projector.
GDC Technology Ltd.
SX-2000 Installation Manual
Figure 8 IMB placement on Christie projectors
Figure 9 IMB placement on NEC projectors
11/8/2010
IMB
installed
here
IMB
installed
here
Page 8 of 42