Introduction; Sx-2000 And Integrated Media Block (Imb) Physical Setup; Server Presentation - GDC SX-2000 Installation Manual

1

Introduction

This document is a guide through the process of setting up the SX-2000 server with the
projector, audio system and automation devices used in cinema theatres.
Note: The currently supported software version for SX-2000 server is 7.7b-rc17 or higher.
Older versions of the server software (7.7b-rc15, or 7.7b-rc16) are no longer supported.
2

SX-2000 and Integrated Media Block (IMB) physical setup

This section describes the physical setup of the SX-2000 server in order to ensure proper
operation.

2.1 Server Presentation

The front and rear panel of the SX-2000 server is shown in Figure 1 and Figure 2.
The SX-2000 can be set up with an external touchscreen LCD, as shown in Figure 3.
GDC Technology Ltd.
SX-2000 Installation Manual
Figure 1 SX-2000 server front panel
Figure 2 SX-2000 server rear panel
11/8/2010
Page 3 of 42