GDC SX-2000 Installation Manual page 35

8. Click [OK] and set up the device parameters for the eCNA device.
9. Enter the IP address of the eCNA device (see Figure 37).
10. The eCNA device has many cues available for automation. These cues can be enabled or
disabled by selecting them after clicking the [Server events], [eCNA controls], and [eCNA
status] buttons. All cues are disabled by default.
11. Click the [Save] button to save configured settings.
GDC Technology Ltd.
SX-2000 Installation Manual
Figure 36 eCNA automation device setup
Figure 37 Automation settings for eCNA device
11/8/2010
Page 34 of 42