Installing The Camera; Precautions; Sd Memory Card; Power Supply - Siemens CVMS2025-IR Configuration

8 Installing the camera

8.1
8.1.1
8.1.2
Siemens AG

Precautions

SD memory card

NOTICE
Please install the SD memory card before switching on the camera.
The system cannot detect an SD card that is inserted during operation.
The camera supports SD and SDHC cards.
Physical interface: Part 1. Physical Layer Specification; Version 1.01.
Images may not be recorded or read correctly if an unsupported SD card is
used with the camera.
A SD card can be used for loop recording of images. The life-span (number of
re-writes possible) of a SD card depends on its capacity. For loop recording, it
is rec-ommended to use a large-capacity SD card.
Do not use a card containing the data recorded by another device with the
camera as this may result in the camera not functioning correctly.
Do not modify or overwrite the data, or change the folder name of a SD card.
This may result in the camera not functioning correctly.
Data recorded with the camera does not comply with the image file format Exif
and the DCF standard. If the SD card is to be removed to play images, use a
personal com-puter for this purpose. Other devices may not be capable of
displaying the images.
Use only new SD cards that were delivered by the manufacturer.

Power supply

Be sure to use only a suitable power adapter. Using the wrong type of power
adapter may cause the camera to malfunction, heat up, or catch fire. Before using
the power adapter, carefully read and observe the Work safety information and the
notes below.
Do not allow the connectors on the power adapter to come into contact with
any other metal objects as this may result in short-circuit.
To connect the power adapter, firmly insert the plug end of the cable into the
power terminal. Do not insert the plug into other jacks as this may cause
malfunctioning.
When removing the connection cable, disconnect it by pulling the plug. Do not
pull on the cable.
Do not drop the power adapter or subject it to strong impact.
Do not use the power adapter in hot and humid places.
Temperature increase on the surface of the adapter is normal. Before moving
the adapter to another location, unplug it from the wall outlet, and wait until its
temperature decreases.
Buzzing noises may come from inside. This does not indicate malfunction.
Using the power adapter near a radio, TV, or cell phone may cause
interference. Use the adapter at sufficient distances from these devices.
Installing the camera
8
Precautions
A6V10334045
22.12.2011
15