Maintenance - Siemens CVMS2025-IR Configuration

Maintenance

11
11 Maintenance
The camera is maintenance-free.
There is a limitation of rewrites that is possible with the SD memory card.
Replacing the SD memory card when performing periodic maintenance on the
camera is recommended, at latest after 10,000 writing cycles.
Small amounts of dirt or dust can be cleaned from the camera using a clean
soft cloth. Do not touch the lens area.
If the surface is touched accidently use a soft cloth moistened with alcohol to
clean it.
Defective modules should be sent to the nearest Siemens office to be
forwarded to the service centre.
67
Siemens AG A6V10334045
22.12.2011