Temperature; Test - Siemens CVMS2025-IR Configuration

9.10.4
9.10.5
Siemens AG
Import - Click on "Import" and select the configuration settings file to be
imported to your network camera.
Export - Click on "Export" and select the directory to to save the file on your
computer.
Factory Default - Clicking on "Default" in the setup.
Basic IP camera network settings (e.g. IP address and camera name) will not be
reset when a software reset is made. Also the export configuration settings and
the settings for import and factory default.
Network Camera Reboot - When you click on "Reboot" the following message
will pop up: "This will reboot the camera. Are you sure?". Click "OK" to reboot
the network camera.

Temperature

There are options for displaying the temperature: Celsius and Fahrenheit. The
current internal temperature of the camera is displayed. If the temperature exceeds
the limit value, an e-mail will be sent depending on the temperature notification
interval setting. If "0" is selected, the e-mail will be delivered only once.
When the temperature of the camera is too high, for example above 70°C，a
warning message will pop up.

Test

The status of the system can be displayed here.
Configuration
9
System
61
A6V10334045
22.12.2011