Utility Program Application; Nas Player Setup; Audio Recording Setup; Firmware Update Setup - Siemens CVMS2025-IR Configuration

10 Utility program application

10.1
10.2
10.3
Siemens AG

NAS player setup

The application for playing back NAS files can be found on the DVD that is
included in the delivery.
Prerequisite: NAS recording has been configured.
1. Click on the green cross button and select the path of the NAS file to be played
back.
2. Click "Play"
3. Click "Stop"

Audio recording setup

This application is found on the DVD that is included in the delivery. You can
record a new voice file and upload it to the network camera. This application can
generate alarm out events. After you finish audio record, please control alarm
audio setting.
To record audio, proceed in the following manner:
Prerequisite: Audio recording has been configured.
1. Click on the green cross button and select the path to which to save the *.wav
file.
2. Make sure a microphone is installed before you start recording your voice.
3. Click on the red button and start recording your voice.
4. Click "Stop".

Firmware update setup

This application is found on the DVD that is included in the delivery. You can
update multiple network cameras simultaneously.
To update firmware, proceed in the following manner:
Utility program application
NAS player setup
A6V10334045
22.12.2011
10
65