Configuration
9
Alarm
9.4.2
9.4.3
44
Siemens AG
Audio event upload
Select an audio event. Upload the *.wav file as a voice alarm message to the SD
card or a PC. Up to 10 audio events can be selected. Alarm input 1 and motion
setting will show different effects depending on which audio event you selected.
Alarm server
Configure the alarm server as follows:
1. Conditions:
Select either "Alarm" or "Motion".
2. Alarm Server IP Address:
Enter the IP address of the alarm server.
3. Alarm Server Port Number:
Enter the alarm server port number.
4. Alarm Input Message:
Enter a message text. This text must not be longer than 64 characters. When
an alarm event occurs, the alarm server will receive this message text.
5. Motion Alarm Message:
Enter a message text. This text must not be longer than 64 characters. When a
motion event occurs, the alarm server will receive this message text.
A6V10334045
22.12.2011