Update; Configuration - Siemens CVMS2025-IR Configuration

Configuration

9
System
9.10.2
9.10.3
60
Siemens AG

Update

You can update the system firmware once the update file is available. It is the
customer's responsibility to update the firmware. All camera motions will be shut
down during the firmware update. Close all dialogs and screens before starting a
firmware update. Never disconnect the power cable and the LAN cable during the
firmware update process. Rebooting the camera after a firmware update may take
approx. 15 minutes. After you finish a software update, please reboot you computer
at first.
Do not disconnect power during a SW update.
Otherwise, it causes SW update failure and you have to send back your
camera to Siemens maintenance.
Configuration
Camera configuration information can be exported and saved to a personal
computer. It can also be imported from the personal computer to network cameras.
A6V10334045
22.12.2011