System Outline; Power Cable (Opc- 1309; Approx. 1 M; 3.3 Ft); Control Cable (Opc-1069) - Icom id- rp2000v Instruction Manual

Vhf digital voice repeater
Table of Contents

Advertisement

1

SYSTEM OUTLINE

The ID-RP2000V is installed into the D-STAR re-
peater system for operation.
The ID-RP2000V never functions as a repeater with-
out the ID-RP2C because it has no relay function.
Antenna
ID-RP2C
POWE
R
10 BESE-T
SERVICE
1 SERVICE
2
ASSIS
T 1
ASSIS
T 2
POWER
SERVICE
T SERVICE
R
ID-RP2000V
Repe
ater
ID-
RP2
Con
trolle
V
r
Internet
Internet
Internet
1
■ ID-RP2000V
The ID-RP2000V is a 144 MHz digital voice and
slow-speed data repeater
to the ID-RP2C.
NOTE: No audio CODEC is performed in the ID-
RP2000V, and thus the ID-RP2000V re-
ceives and transmits 4.8 kbps serial data
only.
Different frequencies are used for each transmis-
sion and reception in semi-duplex mode.
The ID-RP2000V utility software, supplied with the
ID-RP2000V, and a PC are required for both re-
ceive and transmit frequency settings.
ID-RP2L*
*The ID-RP2L is not available
in European countries as of
May 2008.
and connects
(4.8 kbps),
Area
Zone
Signal
Internet

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the id- rp2000v and is the answer not in the manual?

Questions and answers

This manual is also suitable for:

Id-rp2000v

Table of Contents