D Microsoft ® Windows Vista - Icom id- rp2000v Instruction Manual

D Microsoft ®
Windows Vista™
Click
Click
Check the connected unit and connector names,
and COM port number.
(In this example, the USB serial port number is "4.")
Click
24
DRIVER INSTALLATIONS
q Start up Windows.
w Connect the PC and the ID-RP2000V [SERVICE T]
connector through a USB cable
.
separately)
e Right click "Computer" then select "Properties."
• "Computer" is available in <Start> menu with Windows
Vista.
r "System Properties" screen appears as at left.
Click [Device Manager].
t In case "User Account Control" dialog box appears
as at left, click [Continue].
y "Device Manager" screen appears.
Click " " of Ports (COM&LPT).
Confi rm "ICOM ID-RP2000V SERVICE T (COM✱)"
is displayed.
• If not displayed, or few COM por t numbers are
displayed at the same time, the driver installation may
not be installed properly. Un-install the USB driver then
re-install the driver again in such cases.
NOTE: "✱" is the COM port number, that is
used for the communication setting with the
utility software.
<e.g.: When driver re-installation is required>
"ICOM ID-RP2000V SERVICE T (COM✱) (COM✱)"
4
(A-B type; purchase